Getting Started: Points, Lines, Planes and Geometry's Language
The narration between entries paraphrases; it never reads an entry aloud before the entry plays. Every entry in this lecture plays exactly as it does on its own page — same file, same speed, nothing laid over it.
What you can do after this
- Describe how the course works: units, quizzes, the mid-course exam, the final and practice by hand
- Describe and name points, lines, planes, segments and rays, and tell where they meet
- Describe a figure in words, and tell a definition, a postulate and a theorem apart
- Find lengths on a number line, and use congruent segments and segment addition
- Use midpoints and circles, and put the unit's tools together in one problem
What it covers
19 entries in 5 topics. Each number links to that entry on its own.
-
1. How the course works
-
2. Points, lines and planes
-
3. Words and reasons
-
4. Length on a number line
-
5. Midpoints, circles and one problem
Check yourself
How do ray CD and ray DC differ?
The first letter names the starting point. Ray CD starts at C, and ray DC starts at D.
Two different lines cross at point E. What is their intersection?
Point E alone, because two different lines share at most one point.
Point C is at −3 and point D is at 5 on a number line. What is CD?
8. CD = 5 − (−3) = 8, and the absolute value keeps it positive.
B is between A and C, with AB = 4 and BC = 7. What is AC?
11. By segment addition, AC = 4 + 7 = 11.
Circle O has radius OA = 3. How long is a diameter?
6. A diameter is twice the radius, so it is 2 · 3 = 6.
Lecture transcript
The narration as recorded, in order. Where an entry plays, the transcript links to it rather than reprinting it — the entry plays from its own file, unaltered, and says the same thing on its own page.
Welcome to Unit One of Geometry. This lecture starts with how the course works. Then it builds the language every later unit uses: points, lines and planes, segments and rays, lengths, midpoints and circles. Here is the big idea. Geometry is said in words before it is drawn. Name every point with its letter. Find a length as the absolute value of a difference. Check that the parts add up to the whole. The last lesson, 0019, uses all three habits on a trail at Hollin Creek.
Three lessons explain how the course works and how to study it.
How the units and videos are built.
GEO 0001 How This Course Works
Geometry has 27 units. Each unit is a set of short videos, plus one longer lecture. Every short video has a rule, a worked example and a warning about a common mistake. Every video says its names and numbers out loud, so the words alone are enough.
The quizzes, the mid-course exam and the final.
GEO 0002 Quizzes, the Mid-Course Exam and the Final
Each unit ends with a quiz of 10 questions, and you can take it as often as you like. After unit thirteen comes a mid-course exam of 50 questions. The final has 48 questions in 90 minutes, and 32 correct passes. These are StudyWalks exams, not a state test. A parent grants high school credit.
Why you practice with a pencil.
GEO 0003 Practice by Hand: Problems and Constructions
You learn geometry by drawing and working problems by hand. After each unit, work practice problems from a free textbook. Make one construction with a compass and a straightedge. Label every point with the letter the problem uses, because a drawing with no labels hides mistakes.
Five lessons on points, lines and planes, how to name them, and where they meet.
The three undefined terms.
GEO 0004 Points, Lines and Planes: The Undefined Terms
Point, line and plane are the undefined terms of geometry. They are described, not defined. A point is a location with no size. A line is straight and endless both ways. A plane is a flat, endless surface. A dot on paper only stands for a point.
How to name points, lines and planes.
GEO 0005 Naming Points, Lines and Planes
A capital letter names a point. Two points on a line name the line, as line AB. One small letter can also name a line, as line m. So if points A and B lie on line m, it is also line BA. A plane is named by one capital letter, as plane Q, or by three points not on one line.
Segments and rays.
GEO 0006 Segments and Rays
A segment is part of a line: two endpoints and every point between them. Segment AB has endpoints A and B. A ray starts at an endpoint and goes one way forever. Ray CD starts at C and passes through D. Ray CD and ray DC differ, because the first letter names the start.
Collinear and coplanar points.
GEO 0007 Collinear and Coplanar Points
Points are collinear when one line passes through all of them. Points are coplanar when one plane holds all of them. If A, B and C lie on line n, they are collinear. Point D is off the line, so A, B and D are not. Any two points are collinear, so the question matters for three or more.
Where lines and planes meet, step by step.
GEO 0008 Where Lines and Planes Meet
The intersection of two figures is the set of points they share. First, ask whether the figures cross at all. Second, decide what kind of figure they share. Exactly one line passes through any two points. So two different lines that cross meet in exactly one point. If line AB and line CD cross at point E, their intersection is point E alone. Two different planes meet in a line, like two walls at a corner.
Two lessons on saying a figure in words, and on the three kinds of statement.
Describing a figure in words, step by step.
GEO 0009 Describing a Figure in Words
In this course every figure is also given in words, so you can learn while you walk. First, name every point by its letter. Second, say what joins them: a segment, a ray or a line. Third, say every length. Last, say which points lie on which lines. In the example, segment PQ is 5 centimeters long, and ray PR starts at P. Never say "this point". Use the letters.
Definitions, postulates and theorems.
GEO 0010 Definitions, Postulates and Theorems
A definition says exactly what a word means. A postulate is a basic fact we agree to accept without proof. A theorem is a statement that has been proved. It is a postulate that exactly one line passes through any two points. A drawing can suggest a fact, but a drawing proves nothing.
Five lessons on length: distance on a number line, congruent segments and segment addition.
Distance on a number line.
GEO 0011 Distance and Length on a Number Line
Distance is how far apart two points are. On a number line, points at a and b are |a − b| apart. If A is at 2 and B is at 9, then AB = |9 − 2| = 7. Plain AB means a length, which is a number. Segment AB means the figure itself.
A length from its endpoints, step by step.
GEO 0012 Finding a Segment's Length From Its Endpoints
First, find the number for each endpoint. Second, subtract one from the other. Third, take the absolute value, since a length is never negative. So with C at −3 and D at 5, 5 − (−3) = 8, and CD = 8. The other order gives |−3 − 5| = 8 too. Subtracting a negative means adding. Finding 2 here is a common error.
Congruent segments.
GEO 0013 Congruent Segments
Congruent segments are segments with the same length. Matching tick marks show which segments are congruent. If AB = 6 and CD = 6, then segment AB ≅ segment CD. Write AB = CD for the lengths, and the congruence sign for the segments.
The segment addition postulate.
GEO 0014 Segment Addition
The segment addition postulate says that if B is between A and C, then AB + BC = AC. With AB = 4 and BC = 7, AC = 4 + 7 = 11. This works only when B is on segment AC. Off the line, AB + BC is longer than AC.
Solving for a length, step by step.
GEO 0015 Solving for a Length With Segment Addition
When the lengths are expressions, segment addition gives an equation. In the example, AB = 2x + 3, BC = x + 5 and AC = 26. First, write (2x + 3) + (x + 5) = 26. Second, solve: 3x + 8 = 26, so x = 6. Third, put 6 back in: AB = 15 and BC = 11. Check: 15 + 11 = 26. Keep going after x, because x itself is not a length.
Four lessons on midpoints and circles, then one problem that uses the whole unit.
The midpoint of a segment.
GEO 0016 The Midpoint of a Segment
The midpoint of a segment splits it into two congruent segments. To bisect a segment is to cut it at its midpoint. If M is the midpoint of segment AB and AB = 10, then AM = 5 and MB = 5. A point between A and B is the midpoint only when AM = MB.
Using a midpoint to find lengths, step by step.
GEO 0017 Using a Midpoint to Find Lengths
A midpoint gives an equation, because the two halves are equal. In the example, AM = 3x − 1 and MB = x + 7. First, write 3x − 1 = x + 7. Second, solve to get x = 4. Third, find each half: AM = 11 and MB = 11, so AB = 22. On a number line, the midpoint of a and b is at (a + b)/2. So the midpoint of −2 and 8 is at 3. A common error is to stop at AM and call it AB.
Circles: center, radius and diameter.
GEO 0018 Circles: Center, Radius and Diameter
A circle is all the points in a plane at one distance from a point called its center. That distance is the radius. A diameter is a segment through the center with both ends on the circle. In circle O with radius OA = 3, diameter BC = 2 · 3 = 6. The diameter is twice the radius, not half.
Every tool in the unit, in one problem.
GEO 0019 Geometry's Language in One Problem
Here the whole unit comes together. A straight trail at Hollin Creek is marked like a number line, in meters. The trailhead T is at 0, a bridge B is at 120, and a lookout L is at 300. T, B and L are collinear, and B is between T and L. TB = 120 meters and BL = |300 − 120| = 180 meters. By segment addition, TL = 120 + 180 = 300 meters, which matches |300 − 0|. A water stop W at the midpoint of segment TL sits at (0 + 300)/2 = 150. The parking lot K is at −40, so KB = |120 − (−40)| = 160 meters. Last, a safe zone around the lookout has a radius of 50 meters, so its diameter is 100 meters. The three habits from the opening carried every part.
Look at what you can do now. You can describe how the course works and how its exams run. You can describe points, lines and planes, name segments and rays, and tell where two figures meet. You can describe a figure in words, and tell a definition, a postulate and a theorem apart. You can find a length on a number line, and use congruent segments and segment addition. And you can use midpoints and circles, as the trail problem did. Unit two turns to angles, angle pairs and measuring.